How to use the square footage calculator
- Sketch the area and split it into rectangles, circles, triangles and trapezoids.
- Enter each shape. Choose Subtract for anything inside the area you will not cover — a patio in a lawn, a tree ring, a shed.
- Mix units freely: each measurement has its own unit, and everything is converted exactly.
- Read the total in square feet, square metres, square yards and acres, then download a PDF or copy a link that reopens your numbers.
Area formulas
Circle: π × (Diameter ÷ 2)²
Triangle: Base × Height ÷ 2
Trapezoid: (Side A + Side B) ÷ 2 × Height
Heights are always measured at right angles to the base (or between the parallel sides) — not along a sloping edge. Conversions are exact: 1 sq yd = 9 sq ft, 1 acre = 43,560 sq ft, and 1 sq ft = 0.09290304 m².
Worked examples
An L-shaped lawn: 24 × 16 ft plus a 10 × 8 ft extension, minus a round 6 ft flower bed.
- 24 × 16 = 384 sq ft; 10 × 8 = 80 sq ft
- Bed: π × 3² = 28.27 sq ft (subtracted)
- Total = 384 + 80 − 28.27 = 435.73 sq ft = 40.48 m² = 48.41 sq yd
Metric: a trapezoid-shaped bed with parallel sides of 8 m and 5 m, 4 m apart.
- (8 + 5) ÷ 2 × 4 = 26 m² = 279.9 sq ft
Measuring tips
- Irregular curves: divide the area into several trapezoids along a straight baseline, measuring the width every few feet — the more slices, the closer the answer.
- Slopes: this calculator gives the flat (plan) area. Materials spread on a slope cover more surface than the plan area, so allow extra.
- Use the result: the square footage feeds every other calculation on YardCalio — seed, sod, fertilizer, mulch and gravel.
Frequently asked questions
How do I calculate square footage?
Multiply length by width for a rectangle, both in feet. For other shapes use the formula for that shape, and split complex areas into simple shapes that you add or subtract.
How many square feet are in an acre?
Exactly 43,560 square feet (4,046.86 m²).
How do I convert square feet to square yards?
Divide by 9, because a square yard is 3 ft × 3 ft.
How do I convert square feet to square metres?
Multiply by 0.09290304 (exact), or divide by about 10.764.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.