How to use the sod calculator
- Enter the lawn area (use the Square Footage Calculator for odd shapes).
- Enter the length and width of one roll or slab from your supplier — sizes vary by farm and region.
- Add an allowance for cutting around curves, beds and edges.
- If sod is sold by the pallet, enter the area one pallet covers.
Sod formula
Rolls = Area to cover ÷ (Roll length × Roll width), rounded up
Pallets = Area to cover ÷ Pallet coverage, rounded up
Worked example
800 sq ft of lawn, 2 × 5 ft rolls, 5% extra, pallets that cover 450 sq ft.
- 800 × 1.05 = 840 sq ft
- Each roll = 10 sq ft → 84 rolls
- 840 ÷ 450 = 1.87 → 2 pallets
The roll size and pallet coverage here are only example figures — use your supplier’s.
Laying sod successfully
- Prepare and level the soil before delivery — sod is perishable and should be laid the day it arrives.
- Stagger the joints like brickwork and butt the edges tightly without stretching.
- Water thoroughly straight after laying, and keep it moist until the roots knit into the soil.
Frequently asked questions
How much sod do I need?
Measure the lawn area, add a small allowance for cutting, and divide by the area of one roll or slab from your supplier.
How many square feet are on a pallet of sod?
It varies by supplier, grass and roll size. Ask your supplier for the coverage per pallet and enter it in the calculator.
Should I order extra sod?
A small allowance for cutting is usual, more for curved or irregular lawns. Too little is worse than a few spare rolls, because sod from another harvest may not match.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.