How to use the fertilizer calculator
- Enter the area to be fertilized.
- Enter the nutrient rate you want to apply — from your soil test report or the product label.
- Enter that nutrient’s percentage from the bag. The three numbers on a fertilizer bag (N-P-K) are the percentages of nitrogen, phosphate and potash.
- Optionally enter the bag weight to get the number of bags.
The fertilizer formula
Product needed = Nutrient needed ÷ (Nutrient % ÷ 100)
A 24-0-6 fertilizer is 24% nitrogen, so every pound of product contains 0.24 lb of nitrogen. To apply 1 lb of nitrogen you need 1 ÷ 0.24 = 4.17 lb of that product.
Worked example
A 5,000 sq ft lawn, 1 lb of nitrogen per 1,000 sq ft, using a 24-0-6 product in 12 lb bags.
- Nitrogen = 5 × 1 = 5 lb
- Product = 5 ÷ 0.24 = 20.83 lb (4.17 lb per 1,000 sq ft)
- Bags = 1.74 → 2 bags
The rate in this example is only for illustrating the arithmetic — use your soil test or label rate.
Applying fertilizer responsibly
- A soil test tells you which nutrients your soil actually needs; many lawns need little or no phosphorus.
- Some states, counties and countries restrict fertilizer — for example phosphorus, application near water, or timing. Check local rules.
- Sweep any granules off paths and driveways back onto the lawn so they do not wash into drains.
- Calibrate your spreader to the product’s setting, and split the product into two passes at right angles for even coverage.
Frequently asked questions
What do the three numbers on fertilizer mean?
They are the percentages by weight of nitrogen (N), phosphate (P₂O₅) and potash (K₂O), in that order. A 10-10-10 bag is 10% of each.
How do I calculate pounds of fertilizer per 1,000 square feet?
Divide the pounds of nutrient you want per 1,000 sq ft by the nutrient’s percentage as a decimal. For 1 lb of nitrogen from a 20% product: 1 ÷ 0.20 = 5 lb of product per 1,000 sq ft.
How much fertilizer should I put on my lawn?
It depends on the grass type, season, region and soil. Use a soil test or the rate on the product label — this calculator turns that rate into an amount of product.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.