How to use the concrete calculator
- Choose a slab (anything rectangular: patio, path, pad, footing) or a round column / post hole.
- Enter the size and thickness (or diameter and depth). Use the thickness from your plans or local code.
- Set how many identical pours — for example 8 post holes.
- Add an extra allowance for uneven ground and spillage.
- For bagged concrete, type the yield per bag printed on the bag to get the number of bags.
How much concrete do I need? Common sizes
Quick answers for typical US yard, bed and slab sizes. For any other size, shape or depth — or to add an allowance, weights, bags and costs — use the calculator above.
| Area | 4 in deep | 5 in deep | 6 in deep |
|---|---|---|---|
| 10 × 10 ft 100 sq ft | 1.23 yd³ | 1.54 yd³ | 1.85 yd³ |
| 12 × 12 ft 144 sq ft | 1.78 yd³ | 2.22 yd³ | 2.67 yd³ |
| 10 × 20 ft 200 sq ft | 2.47 yd³ | 3.09 yd³ | 3.7 yd³ |
| 16 × 16 ft 256 sq ft | 3.16 yd³ | 3.95 yd³ | 4.74 yd³ |
| 20 × 20 ft 400 sq ft | 4.94 yd³ | 6.17 yd³ | 7.41 yd³ |
| 12 × 24 ft 288 sq ft | 3.56 yd³ | 4.44 yd³ | 5.33 yd³ |
| 20 × 40 ft 800 sq ft | 9.88 yd³ | 12.35 yd³ | 14.81 yd³ |
| 25 × 50 ft 1,250 sq ft | 15.43 yd³ | 19.29 yd³ | 23.15 yd³ |
Exact volume for a level area, before any extra allowance; order a little more for spillage and settling. Slab volumes only; use the calculator above for footings, post holes and bag counts from your bag’s yield.
Concrete volume formulas
Round hole or column: π × (Diameter ÷ 2)² × Depth
Cubic yards = cubic feet ÷ 27 · m³ = cubic feet × 0.0283168
Bags = Volume ÷ yield per bag, rounded up
Convert inches to feet before multiplying (4 in = 0.333 ft), or let the calculator do it — every measurement can use its own unit.
Worked examples
A 12 × 10 ft patio slab, 4 in thick, with 10% extra.
- 12 × 10 × (4 ÷ 12) = 40 cu ft = 1.481 cu yd
- With 10%: 1.63 cu yd (1.246 m³). Ready-mix is usually ordered in fixed increments, so ask your supplier how they round.
Eight fence-post holes, 10 in across and 36 in deep, 10% extra, with bags whose label states a yield of 0.6 cu ft.
- One hole: π × (5 ÷ 12)² × 3 = 1.636 cu ft; × 8 = 13.09 cu ft
- With 10%: 14.4 cu ft
- 14.4 ÷ 0.6 = 24 → 24 bags. (The post itself displaces some concrete, so this slightly overestimates.)
0.6 cu ft is only the example bag’s label figure. Yields differ by brand, mix and bag size — always use the number on your bag.
Ready-mix or bags?
Bagged concrete suits post holes, small pads and repairs: you mix as you go and nothing is wasted. For a slab of more than a small fraction of a cubic yard, a ready-mix delivery is usually less work and gives a more consistent pour — but suppliers have minimum loads and delivery charges, so compare both. This calculator gives you both numbers.
Common concrete mistakes
- Forgetting the units: 4 × 10 × 12 is not 480 cubic feet when the 4 is inches — it is 40.
- No allowance: sub-grades are never perfectly flat and forms bow slightly. Running short mid-pour is far worse than a little left over.
- Guessing bag yield: bag weight does not tell you the yield. Read the label.
- Treating this as a design: thickness, reinforcement, base and joints depend on loads, soil and climate — follow your plans, local code or a qualified professional.
Frequently asked questions
How do I calculate cubic yards of concrete?
Multiply length × width × thickness in feet to get cubic feet, then divide by 27. A 10 × 10 ft slab 4 in thick is 10 × 10 × 0.333 = 33.3 cu ft = 1.23 cu yd, before any allowance.
How many bags of concrete do I need?
Divide the volume by the yield per bag printed on the bag, and round up. The yield depends on the product and bag size, so check your bag rather than assuming.
How much extra concrete should I order?
Contractors commonly add a small allowance for uneven sub-grade and spillage; set the amount from your contractor’s or supplier’s advice. The calculator shows the volume with and without it.
How thick should a concrete slab be?
It depends on what it carries, the base and the climate. Follow your plans, local building code or a qualified professional; this calculator handles the quantity for whatever thickness you enter.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.