How to use the grass seed calculator
- Measure each lawn area — rectangles, circles, or an area you already know — and add as many areas as you need. Leave out paths, patios and planted beds.
- Choose New lawn or Overseeding and your grass type. The calculator fills in a starting rate; change it to the rate printed on your seed bag.
- Enter the bag weight and price to see how many bags to buy and what they cost.
- Download the PDF, print it, or copy a link that reopens your exact numbers.
The grass seed formula
Seed (lb) = Lawn area (ft²) ÷ 1,000 × Rate (lb per 1,000 ft²)
Seed (kg) = Lawn area (m²) × Rate (g per m²) ÷ 1,000
Bags = Seed ÷ Bag weight, rounded up
In the US, seed labels usually give a rate in pounds per 1,000 square feet; elsewhere you will see grams per square metre or kilograms per 100 m². They are the same thing in different units — the calculator converts between them exactly.
Typical seeding rates
Seeding rates depend on the grass species: small-seeded grasses such as Kentucky bluegrass need far fewer pounds than large-seeded tall fescue to put the same number of seeds on the ground. Penn State Extension publishes these rates for establishing a new lawn:
| Grass | New lawn, per 1,000 ft² | New lawn, metric | Overseeding starting point* |
|---|---|---|---|
| Turf-type tall fescue | 6–8 lb | 29–39 g/m² | 3–4 lb |
| Kentucky bluegrass | 2–3 lb | 10–15 g/m² | 1–1.5 lb |
| Perennial ryegrass | 4–5 lb | 20–24 g/m² | 2–2.5 lb |
| Fine fescues | 4–5 lb | 20–24 g/m² | 2–2.5 lb |
| Kentucky bluegrass + perennial ryegrass mix | 2–3 lb | 10–15 g/m² | 1–1.5 lb |
| Bluegrass + fine fescue + ryegrass mix | 3–4 lb | 15–20 g/m² | 1.5–2 lb |
New-lawn rates: Penn State Extension, “Lawn Establishment”. *Overseeding: about half the new-lawn rate, used here as a starting point only — the same relationship University of Maryland Extension shows for tall fescue (6–8 lb for a new lawn, 4 lb for overseeding). Your seed label, or your local extension service, takes priority.
Seed quality matters too. Labels list purity and germination; Penn State notes that rates should be increased when either is low, because fewer of the seeds you buy will grow. Mixtures have their own label rate — use it rather than the rate for a single species.
New lawn or overseeding?
A new lawn is sown on bare, prepared soil, so all the cover has to come from seed. Overseeding adds seed to an existing lawn to thicken it, so a lower rate is normally used. For overseeding to work, seed needs contact with soil: mow short, then rake, scarify or core-aerate before sowing, and keep the surface moist until the seed germinates. Timing and method depend on your grass type and climate — your local extension service is the best guide.
Worked examples
New tall fescue lawn, 50 ft × 40 ft, 7 lb per 1,000 ft², 5% extra, 5 lb bags.
- Area = 50 × 40 = 2,000 ft²
- Seed = 2,000 ÷ 1,000 × 7 = 14 lb; with 5% extra = 14.7 lb (6.67 kg)
- Bags = 14.7 ÷ 5 = 2.94 → 3 bags
Overseeding two areas — a 30 × 25 ft lawn and a round area 12 ft across — at 3.5 lb per 1,000 ft², 3 lb bags.
- Areas = 30 × 25 = 750 ft² and π × 6² = 113.1 ft²; total 863.1 ft²
- Seed = 863.1 ÷ 1,000 × 3.5 = 3.02 lb
- Bags = 3.02 ÷ 3 = 1.01 → 2 bags
Metric: 150 m² at 25 g/m², 5% extra, 2.5 kg bags.
- Seed = 150 × 25 = 3,750 g = 3.75 kg; with 5% extra = 3.938 kg
- Bags = 3.938 ÷ 2.5 = 1.58 → 2 bags
Measuring your lawn
Measure in a straight line with a tape or a measuring wheel. Split an irregular lawn into rectangles and circles and add each one as a separate area; for a curved edge, a rectangle that follows the average line is usually close enough for buying seed. One acre is exactly 43,560 ft² (about 4,047 m²), so at 7 lb per 1,000 ft² an acre needs 43.56 × 7 ≈ 305 lb of seed.
Frequently asked questions
How much grass seed do I need per 1,000 square feet?
It depends on the grass. Penn State Extension gives 6–8 lb for a new turf-type tall fescue lawn, 2–3 lb for Kentucky bluegrass and 4–5 lb for perennial ryegrass or fine fescues. Always check the rate on your seed label.
How much seed do I need to overseed?
Overseeding normally uses a lower rate than a new lawn. This calculator starts at about half the new-lawn rate; University of Maryland Extension, for example, lists 4 lb of tall fescue per 1,000 ft² for overseeding against 6–8 lb for a new lawn. Follow your seed label.
How many grams per square metre is 1 lb per 1,000 sq ft?
1 lb per 1,000 ft² is 4.88 g per m² (0.488 kg per 100 m²), using the exact definitions of the pound and the foot.
Does seed rate change with seed quality?
Yes. Seed labels show purity and germination; when either is low, fewer seeds grow, so more seed is needed for the same result. Penn State Extension recommends increasing the rate in that case.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- Penn State Extension — Lawn Establishment — Seeding rates per 1,000 ft² for a new lawn: turf-type tall fescue 6–8 lb, Kentucky bluegrass 2–3 lb, perennial ryegrass 4–5 lb, fine fescues 4–5 lb; mixes 2–4 lb.
- Penn State Extension — Turfgrass Seed and Seed Mixtures — Explains seed labels (purity and germination) and why rates are raised for low-quality seed.
- University of Maryland Extension — lawn seeding and overseeding rates — Lists turf-type tall fescue at 6–8 lb per 1,000 ft² to establish a lawn and 4 lb per 1,000 ft² for overseeding.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions used for the foot and pound conversion factors.