How to use the topsoil calculator
- Choose Rectangular area for lawns and borders, Circular bed for round beds, or Raised bed(s) for one or more identical beds.
- Enter the measurements and the depth of soil you will add. For raised beds, that is the fill height.
- Choose the soil type: mineral topsoil is much heavier than a compost-rich raised-bed mix, which matters for weight-rated bags and delivery.
- Set your extra allowance for settling and spillage, then add bag sizes or prices if needed.
How much topsoil do I need? Common sizes
Quick answers for typical US yard, bed and path sizes. For any other size, shape or depth — or to add an allowance, weights, bags and costs — use the calculator above.
| Area | 2 in deep | 4 in deep | 6 in deep |
|---|---|---|---|
| 10 × 10 ft 100 sq ft | 0.62 yd³ ≈0.65 t | 1.23 yd³ ≈1.3 t | 1.85 yd³ ≈1.95 t |
| 12 × 12 ft 144 sq ft | 0.89 yd³ ≈0.94 t | 1.78 yd³ ≈1.87 t | 2.67 yd³ ≈2.81 t |
| 10 × 20 ft 200 sq ft | 1.23 yd³ ≈1.3 t | 2.47 yd³ ≈2.6 t | 3.7 yd³ ≈3.9 t |
| 16 × 16 ft 256 sq ft | 1.58 yd³ ≈1.66 t | 3.16 yd³ ≈3.33 t | 4.74 yd³ ≈4.99 t |
| 20 × 20 ft 400 sq ft | 2.47 yd³ ≈2.6 t | 4.94 yd³ ≈5.2 t | 7.41 yd³ ≈7.8 t |
| 12 × 24 ft 288 sq ft | 1.78 yd³ ≈1.87 t | 3.56 yd³ ≈3.75 t | 5.33 yd³ ≈5.62 t |
| 20 × 40 ft 800 sq ft | 4.94 yd³ ≈5.2 t | 9.88 yd³ ≈10.4 t | 14.81 yd³ ≈15.61 t |
| 25 × 50 ft 1,250 sq ft | 7.72 yd³ ≈8.13 t | 15.43 yd³ ≈16.26 t | 23.15 yd³ ≈24.39 t |
Exact volume for a level area, before any extra allowance; order a little more for spillage and settling. “t” = US tons at YardCalio’s typical loose density for topsoil (screened, moist) (1.05 US tons per cubic yard). Real weights vary — your supplier’s figure takes priority.
Topsoil formula
Circle: Volume = π × (Diameter ÷ 2)² × Depth
Raised beds: Volume = Length × Width × Fill height × Number of beds
With allowance: Volume × (1 + Allowance % ÷ 100)
Cubic yards = Cubic feet ÷ 27 · Litres = m³ × 1,000
Worked examples
Two raised beds, each 8 ft × 4 ft, filled 12 in deep with a raised-bed mix, plus 10%, in 1.5 cu ft bags.
- One bed: 8 × 4 × 1 = 32 ft³. Two beds: 64 ft³ = 2.37 yd³
- With 10%: 70.4 ft³ (2.607 yd³) → bulk order 2.75 yd³
- In 1.5 cu ft bags: 70.4 ÷ 1.5 = 46.93 → 47 bags
Metric: a new 10 m × 8 m lawn with 10 cm of topsoil, plus 10%.
- Volume = 10 × 8 × 0.10 = 8 m³
- With 10%: 8.8 m³ → order 8.8 m³
- Typical weight at 1.25 t/m³: about 11 tonnes (range 8.8–12.76 t, depending largely on moisture).
How much topsoil depth do you need?
Typical planning depths used by gardeners and landscapers:
| Use | Typical depth (inches) | Typical depth (mm) |
|---|---|---|
| Lawn top-dressing | 0.25–0.5 in | 6–12 mm |
| New lawn (seed or turf) | 4–6 in | 100–150 mm |
| Flower / vegetable bed | 8–12 in | 200–300 mm |
| Raised bed (fill to height) | 6–24 in | 150–600 mm |
Root depth varies by plant, and existing ground conditions matter: on compacted or poor ground, loosening the soil underneath is often as important as the depth you add.
Settling: why the allowance is your choice
Loose soil settles after it is spread, walked on and watered. How much depends on the soil’s texture, organic content and moisture and on how it is handled, so no single “settling factor” is correct. Rather than hide a fixed multiplier, this calculator shows the allowance as a percentage you can see and change. If you are unsure, buy a little extra, or plan to top up raised beds after the first season.
How much does topsoil weigh?
| Material | Typical range (lb/ft³) | US tons per yd³ | Tonnes per m³ |
|---|---|---|---|
| Topsoil (screened, moist) | 62–91 | 0.84–1.22 | 1–1.45 |
| Garden / raised-bed soil mix | 31–59 | 0.42–0.8 | 0.5–0.95 |
| Compost | 28–50 | 0.38–0.67 | 0.45–0.8 |
Typical values for loose, as-delivered material. They are planning approximations, not specifications — your supplier’s figure for their product always takes priority.
Wet soil can weigh far more than dry soil, so treat any weight as an estimate. This matters most when choosing a delivery vehicle or when bags are sold by weight.
Common topsoil mistakes
- Using full bed height for raised beds when you will fill to a few inches below the rim.
- Forgetting the units of bags. Bags are labelled in cubic feet, quarts, litres or by weight. Choose the right unit in the bag box.
- Ordering heavy topsoil for raised beds when a lighter blend is what you want — the two differ greatly in weight per bag.
- Not allowing for settling — or allowing twice, by adding extra depth and a percentage.
Frequently asked questions
How many bags of soil fill a 4 × 8 raised bed?
A 4 ft × 8 ft bed filled 12 inches deep holds 32 ft³. That is about 22 bags of 1.5 cu ft or 16 bags of 2 cu ft, before any extra allowance.
How many litres of compost do I need for a raised bed?
Multiply length × width × depth in metres to get cubic metres, then × 1,000 for litres. A 2 m × 1 m bed filled 25 cm deep holds 0.5 m³ = 500 litres — ten 50 L bags.
Is a ton of topsoil the same as a cubic yard?
Not exactly. At the typical density used here, a cubic yard of moist topsoil weighs around one US ton, but the real figure varies with moisture and composition. Buy by volume where possible, or ask for the supplier’s density.
Should I mix compost into topsoil?
Many gardeners blend compost into topsoil for beds. If you do, calculate the total volume once, then split it by your mix proportions — e.g. 70% topsoil and 30% compost.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions used for inch, foot, yard and pound conversion factors.
- Weights and Measures Act 1985 (UK), Schedule 1 — UK legal definitions of the yard (0.9144 m) and pound (0.45359237 kg).