How to use the watering calculator
- Enter the area you water.
- Enter the depth of water to apply — for example the amount your local extension service or water utility recommends for your grass and season.
- Optionally enter your flow rate to see the run time. Measure it by timing how long your hose or sprinkler takes to fill a bucket of known size.
Water volume formula
US gallons = cubic feet × 7.48052 (one US gallon is exactly 231 cubic inches)
Minutes = Gallons ÷ Gallons per minute
So 1 inch of water over 1,000 sq ft is 623.4 US gallons, and 1 mm over 1 m² is exactly 1 litre.
Worked example
Applying ½ inch of water to a 2,500 sq ft lawn with a sprinkler measured at 8 gallons per minute.
- Volume = 2,500 × (0.5 ÷ 12) = 104.17 cu ft
- = 779 US gallons (2,950 litres)
- Run time = 779 ÷ 8 = 97 minutes
Getting water where it is needed
- Measure what lands: set a few straight-sided cans around the area, run the sprinkler for a set time and measure the depth in each — sprinklers rarely apply water evenly.
- Avoid runoff: on slopes or heavy soil, split the run time into two or three shorter cycles.
- Follow local rules: many areas restrict watering days and times.
Frequently asked questions
How many gallons is one inch of water on a lawn?
623.4 US gallons per 1,000 square feet — about 0.62 gallons per square foot.
How many litres is 1 mm of water?
Exactly 1 litre per square metre.
How long should I water my lawn?
Divide the gallons needed by your measured flow rate in gallons per minute. How much water your lawn needs depends on the grass, soil, weather and season — your local extension service can advise.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.