
On this page (7 sections)
Most cost surprises in landscaping come from units, not prices: a quote per ton applied to a quantity in cubic yards, a bag price compared with a bulk price that excludes delivery, or tax forgotten on the delivery charge. This guide sets out a simple, repeatable way to turn a measured quantity into a cost you can trust.
About the numbers in this guide: the prices used below ($45 per cubic yard, $75 delivery, $5 per bag, 7% tax) are invented round figures to show the arithmetic. They are not market prices — use your supplier’s quote.
Total = Material cost + Delivery + Tax
Cost per ft² = Total ÷ Area
Step 1: Get the quantity right first
Price only what you will actually order. That means the measured volume, plus any allowance for waste or compaction, rounded up to the increments your supplier sells. Our calculators show all three numbers — exact, with allowance, and the order quantity — so you can see what you are paying for. If you have several areas of the same material, add them together before rounding; see how to calculate material waste.
Step 2: Match the price unit
| Supplier prices per… | Quantity you need | How to convert |
|---|---|---|
| Cubic yard | Cubic yards | Cubic feet ÷ 27 |
| Cubic metre | Cubic metres | Cubic yards × 0.7646 (exact definition) |
| US ton / metric tonne | Weight | Volume × the product’s density — ask the supplier |
| Bag | Number of bags | Volume ÷ bag size, rounded up |
Prices quoted in different volume units can be converted directly: $45 per cubic yard is the same as $58.86 per cubic metre, because a cubic metre is 1.308 cubic yards. Weight-based prices need a density, and because density varies, the cost becomes a range rather than a single figure.
Step 3: Worked example — bulk delivery
A 20 × 10 ft area of pea gravel, 3 inches deep, with a 5% allowance.
- Volume = 200 ft² × 3 ÷ 324 = 1.852 yd³; with 5% = 1.944 yd³.
- Order, rounded up to the nearest half yard = 2 yd³.
- Material = 2 × $45 = $90.00; delivery $75.00.
- Tax at 7% on materials and delivery = $11.55 → total $176.55, or $0.88 per square foot.
Whether tax applies to delivery depends on where you live; the calculators let you include or exclude it.
Step 4: The same job in bags
Same area, 0.5 cu ft bags at $5 each.
- Volume with 5% = 52.5 ft³ → 105 bags → 105 bags.
- Material = 105 × $5 = $525.00; tax $36.75 → total $561.75.
At these example prices, bulk is far cheaper for this job. For small jobs the delivery charge dominates, and bags can win. Here is the same comparison for a 3 ft wide path, 2 inches deep, at different lengths (example prices, before tax):
| Path length | Area | Bulk incl. delivery | Bags | Cheaper |
|---|---|---|---|---|
| 4 ft | 12 ft² | $97.50 | $25.00 (5 bags) | Bags |
| 8 ft | 24 ft² | $97.50 | $45.00 (9 bags) | Bags |
| 12 ft | 36 ft² | $97.50 | $65.00 (13 bags) | Bags |
| 20 ft | 60 ft² | $97.50 | $105.00 (21 bags) | Bulk |
With your own prices the crossover point will move — run both options through the calculator’s cost section and compare totals.
Step 5: When the price is per ton
Suppose the same pea gravel were quoted at $30 per US ton (again an example price). The 5%-allowance volume of 1.944 yd³ weighs about 2.54 US tons at a typical density, but anywhere from 2.38 to 2.79 tons across the usual range. The material cost is therefore roughly $71.28–$83.58. Ask for the supplier’s density to narrow it down, and remember that wet material weighs more.
Step 6: Don’t forget the extras
- Edging, landscape fabric, pins and sub-base are separate line items.
- Equipment hire (a plate compactor or turf cutter) and disposal of dug-out soil.
- Minimum delivery quantities or part-load charges.
- A small contingency for surprises below the surface.
The Garden Material Planner lets you enter a price per unit for each material plus one delivery charge and tax rate, then prints a costed materials list you can take to suppliers.
Sources
Sources were checked when this guide was published. Where published guidance differs, this guide says so; for structural work, follow your local specification.
Worked examples are generated by the same tested calculation engine as our calculators. See our editorial policy and methodology.


