How to use the landscape fabric calculator
- Measure the bed and decide which way you will unroll the fabric — enter that as the length.
- Enter the roll width and length from the label.
- Enter the overlap between neighbouring strips from the product instructions.
Landscape fabric formula
Fabric length = Strips × Bed length
Rolls = strips ÷ whole strips per roll (round up)
Each extra strip covers only the roll width minus the overlap, which is why fabric needs are higher than the bed area alone suggests.
Worked example
A 30 × 8 ft gravel path base, 4 ft × 100 ft rolls, 6 in overlap.
- Strips = 1 + (8 − 4) ÷ 3.5 → 3
- Fabric = 3 × 30 = 90 ft (360 sq ft of fabric for a 240 sq ft path)
- Each 100 ft roll gives 3 strips → 1 roll
Using landscape fabric
- Under gravel paths, fabric separates the stone from the soil below — see how to plan a gravel garden path.
- Pin the fabric with landscape staples along the overlaps and edges.
- In planted beds, cut an X for each plant and fold the flaps back.
Frequently asked questions
How much landscape fabric do I need?
Work out how many strips cover the width (allowing for overlap), multiply by the bed length, then divide into rolls.
How much should landscape fabric overlap?
Follow the product instructions; manufacturers state the overlap for their fabric.
Can I join fabric end to end?
Yes, with an overlap at the joint. The calculator joins strips end to end only when the bed is longer than one roll.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.