How to use the sand calculator
- Choose the shape — rectangle, circle, triangle or trapezoid — and enter its measurements. Split L-shapes and irregular areas into simple shapes.
- Enter the depth of sand you need. For paver bedding sand this is usually the screeded depth (nominally 1 in / 25 mm), not the depth after the pavers are compacted.
- Set an extra allowance for spillage, screeding and compaction.
- Read the volume in cubic feet, cubic yards and cubic metres, and the weight range. If your supplier quotes a density for their sand, tick Use my supplier’s density and enter it.
- Add prices per cubic yard, ton, cubic metre, tonne or bag to estimate the cost, then download a PDF or print it.
How much sand do I need? Common sizes
Quick answers for typical US yard, bed and path sizes. For any other size, shape or depth — or to add an allowance, weights, bags and costs — use the calculator above.
| Area | 1 in deep | 2 in deep | 4 in deep |
|---|---|---|---|
| 10 × 10 ft 100 sq ft | 0.31 yd³ ≈0.4 t | 0.62 yd³ ≈0.81 t | 1.23 yd³ ≈1.61 t |
| 12 × 12 ft 144 sq ft | 0.44 yd³ ≈0.58 t | 0.89 yd³ ≈1.16 t | 1.78 yd³ ≈2.32 t |
| 10 × 20 ft 200 sq ft | 0.62 yd³ ≈0.81 t | 1.23 yd³ ≈1.61 t | 2.47 yd³ ≈3.23 t |
| 16 × 16 ft 256 sq ft | 0.79 yd³ ≈1.03 t | 1.58 yd³ ≈2.06 t | 3.16 yd³ ≈4.13 t |
| 20 × 20 ft 400 sq ft | 1.23 yd³ ≈1.61 t | 2.47 yd³ ≈3.23 t | 4.94 yd³ ≈6.45 t |
| 12 × 24 ft 288 sq ft | 0.89 yd³ ≈1.16 t | 1.78 yd³ ≈2.32 t | 3.56 yd³ ≈4.64 t |
| 20 × 40 ft 800 sq ft | 2.47 yd³ ≈3.23 t | 4.94 yd³ ≈6.45 t | 9.88 yd³ ≈12.9 t |
| 25 × 50 ft 1,250 sq ft | 3.86 yd³ ≈5.04 t | 7.72 yd³ ≈10.08 t | 15.43 yd³ ≈20.16 t |
Exact volume for a level area, before any extra allowance; order a little more for spillage and settling. “t” = US tons at YardCalio’s typical loose density for sand (dry, loose) (1.31 US tons per cubic yard). Real weights vary — your supplier’s figure takes priority.
The sand volume formula
Volume = Area × Depth
Order volume = Volume × (1 + extra % ÷ 100)
Weight = Volume × bulk density
Keep the units consistent: square feet × feet gives cubic feet (divide inches by 12 first), and 27 cubic feet make one cubic yard. In metric, square metres × metres gives cubic metres. The calculator converts every unit using the exact legal definitions of the inch and the pound.
Density and compaction: why sand weight is a range
Sand is sold by volume or by weight, and the link between the two is its bulk density — the weight of a given volume including the air between the grains. It is not a fixed number:
- Moisture: damp sand weighs more than dry sand, and bulking from moisture can change how much space it takes up.
- Grading and mineral: well-graded sand with a range of grain sizes packs more tightly than uniform sand.
- Handling: loose, freshly tipped sand is lighter per cubic foot than sand that has settled or been compacted.
Published references give different figures for “sand” for these reasons — for example, The Engineering ToolBox lists dry sand at about 1,555 kg/m³ (97 lb/ft³), while Caterpillar’s earthwork tables use about 1,420 kg/m³ for loose dry sand. This calculator therefore shows a range of 87–106 lb/ft³ (1,400–1,700 kg/m³) and uses 97 lb/ft³ (1,550 kg/m³) as the typical value. When your supplier states a density for their product, enter it instead.
Compaction works the other way round: sand that is compacted or vibrated (for example, under pavers) ends up thinner than it was when screeded loose. If your installer specifies a loose screeded depth, enter that depth; if they specify a compacted depth, add an allowance for the extra material needed — they can tell you how much.
| Material | Typical range (lb/ft³) | US tons per yd³ | Tonnes per m³ |
|---|---|---|---|
| Sand (dry, loose) | 87–106 | 1.18–1.43 | 1.4–1.7 |
Typical values for loose, as-delivered material. They are planning approximations, not specifications — your supplier’s figure for their product always takes priority.
Worked examples
Bedding sand for a 12 ft × 10 ft paver patio, 1 in deep, 10% extra, in 50 lb bags.
- Area = 12 × 10 = 120 ft²; volume = 120 × (1 ÷ 12) = 10 ft³ = 0.37 yd³ (0.283 m³)
- With 10% extra: 11 ft³ = 0.407 yd³ → bulk order 0.5 yd³
- Weight at 97 lb/ft³: 11 × 96.8 ≈ 1,064 lb (range 961–1,167 lb)
- In 50 lb bags: 1,064 ÷ 50 = 21.29 → 22 bags
Metric: a round sand pit 2 m across, 30 cm deep, 5% extra, in 25 kg bags.
- Area = π × 1² = 3.142 m²; volume = 3.142 × 0.30 = 0.942 m³
- With 5% extra: 0.99 m³ → bulk order 1 m³
- Weight at 1,550 kg/m³ ≈ 1,534 kg (1.53 t)
- In 25 kg bags: 1,534 ÷ 25 = 61.36 → 62 bags. At this size, a bulk bag or loose delivery is usually more practical.
Which sand, and how deep?
This calculator handles the quantity; the right type of sand depends on the job, and product names vary between countries and suppliers. Two common cases:
- Paver bedding sand. Interlocking Concrete Pavement Institute (ICPI) guidance calls for a bedding layer screeded to a nominal 1 in (25 mm) over a compacted base, using coarse, washed sand that meets its grading requirements. Bedding sand should not be used to fill dips in the base. The Paver Patio Calculator works out bedding sand, base and pavers together.
- Play sand and sandpits. Use sand sold specifically for play areas. Depth for decorative or play use is up to you; protective surfacing under equipment is a different matter and should follow the U.S. Consumer Product Safety Commission’s Public Playground Safety Handbook or your local standard.
For joint sand between pavers (including polymeric sand), follow the product’s coverage figure: the amount depends on joint width, paver depth and pattern, so it is not estimated here.
Bulk or bags?
Bagged sand is convenient for small jobs and top-ups; loose or bulk-bag deliveries usually suit anything beyond a fraction of a cubic yard or cubic metre. Bags are normally sold by weight, so the bag count depends on the density — the calculator converts using the value shown, and you can enter the supplier’s own figure for a closer answer.
Frequently asked questions
How much does a cubic yard of sand weigh?
Using this calculator’s typical range for loose dry sand (2,360–2,865 lb per cubic yard), about 1.18–1.43 US tons. Damp sand is heavier. Ask your supplier for the figure for their product.
How many 50 lb bags of sand make a cubic yard?
At the typical 2,613 lb per cubic yard, about 52 bags. Because bag weight depends on density and moisture, check the bag label for its stated volume or coverage too.
How much sand do I need under pavers?
Bedding sand is typically screeded to a nominal 1 inch (25 mm) over a compacted base. Multiply the patio area by that depth and add a small allowance. The Paver Patio Calculator does this and adds the pavers and base material.
Should I use the loose or compacted depth?
Use the depth you will actually spread and screed. If a specification gives a compacted depth, add an allowance for compaction — ask your installer or supplier how much for the material you are buying.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions used for inch, foot, yard and pound conversion factors.
- Weights and Measures Act 1985 (UK), Schedule 1 — UK legal definitions of the yard (0.9144 m) and pound (0.45359237 kg).
- The Engineering ToolBox — Densities of common materials — Lists dry sand at about 1,555 kg/m³ (97 lb/ft³). Values are general references; bulk density varies with grading and moisture.
- Caterpillar — Earthwork volumes reference tables — Gives dry sand at about 1,420 kg/m³ in loose volume, for earthmoving estimates.
- ICPI Tech Spec 17 — Bedding sand selection for interlocking concrete pavements (copy hosted by ORCO) — Bedding sand for pavers is screeded to a nominal 1 in (25 mm); grading requirements for bedding sand.
- U.S. Consumer Product Safety Commission — Public Playground Safety Handbook — Protective surfacing depth for play areas depends on fall height.