Landscape Edging Calculator

Find out how much edging to buy for flower beds, borders and tree rings — from a measured length, a rectangular bed or a circle — and how many pieces and stakes that is.

Formulas tested · engine v1.0.0Runs on your deviceHow we calculate

Measurement system

Changing system converts the numbers you’ve entered, so your project stays the same size.

Lay a hose or string along a curved edge, then measure it.

%

For overlaps at joints and cuts.

Your result—

Your estimate

—

Enter your measurements to see the quantity.

Length of edging, pieces and stakes for beds, borders and tree rings.

Find suppliers near you

Take your landscape edging numbers to a local supplier and ask for a quote. Each button opens a search in your map app.

Leave empty to search near you. Only added to the map search — YardCalio never sees it or your location.

Opens Google, Apple or Bing Maps in a new tab. YardCalio does not recommend or rank businesses and is not paid by them. What to ask a supplier →

How to use the edging calculator

  1. Choose how to measure: a length you measured along the edge (best for curves), a rectangular bed, or a round bed.
  2. Enter the length of one piece or roll of your edging, and the stakes per piece if it uses them.
  3. Add an allowance for overlaps at joints.

Edging formulas

Rectangle perimeter = 2 × (Length + Width)
Circle circumference = π × Diameter
Pieces = Edge length × (1 + allowance) ÷ Piece length (round up)

For curved beds, lay a garden hose along the edge, mark it at the ends and measure the hose — it is quicker and more accurate than slicing the curve into shapes.

Worked examples

A 16 × 6 ft border, 20 ft rolls, 5 stakes per roll, 5% extra.

  1. Perimeter = 2 × (16 + 6) = 44 ft; with 5% = 46.2 ft
  2. Rolls = 46.2 ÷ 20 → 3; stakes = 15

A tree ring 8 ft across with 4 ft edging pieces.

  1. Circumference = π × 8 = 25.13 ft; with 5% = 26.39 ft
  2. Pieces = 7

Frequently asked questions

How do I measure for landscape edging?

For straight beds add up the sides; for circles use π × diameter; for curves, lay a hose along the edge and measure it.

How much extra edging should I buy?

Allow a little for overlaps or connectors at joints and for cutting; the product instructions say how joints are made.

Sources & methodology

Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.

  1. NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.