Measurements & Calculations

Cubic Yards vs Cubic Meters Explained

What a cubic yard and a cubic meter are, how to convert between them exactly, and why landscaping suppliers use each — with worked examples.

A wheel loader moving gravel on a large stockpile
Bulk aggregate is sold by volume (cubic yards or cubic metres) or by weight — knowing the conversion avoids ordering the wrong amount. Photo: myARDOT via Flickr · CC BY 2.0 · cropped and resized
On this page (7 sections)

Bulk landscaping materials — gravel, topsoil, mulch, sand — are sold by volume. In the United States the unit is almost always the cubic yard; in the UK, Australia, Ireland and much of Canada it is the cubic meter (spelled “cubic metre” outside the US). The two are close in size, which is exactly why they get confused.

What each unit is

A cubic yard (yd³) is the volume of a cube 1 yard (3 feet) on each side. Because 3 × 3 × 3 = 27, one cubic yard is 27 cubic feet.

A cubic meter (m³) is the volume of a cube 1 meter on each side. It equals 1,000 liters, which is handy because bagged products in metric countries are often labelled in liters.

The exact conversion

Since 1959 the yard has been defined as exactly 0.9144 meters. Cubing that gives an exact figure:

1 yd³ = 0.9144³ m³ = 0.764554857984 m³
1 m³ = 1.307951 yd³
Cubic yard compared with cubic metre, drawn to scaleTwo cubes drawn to the same scale. A cubic yard has sides of 0.9144 metres and holds 0.765 cubic metres. A cubic metre is about 31 percent larger, equal to 1.308 cubic yards. 1 cubic yard 3 ft cube · 27 ft³ · 0.765 m³ 1 cubic metre 1 m cube · 1,000 L · 1.308 yd³ 0.9144 m 1 m
Diagram: the two cubes are drawn to the same scale — a cubic metre is about 31% larger than a cubic yard.

For estimating, 1 cubic yard ≈ 0.76 m³ and 1 m³ ≈ 1.31 yd³ are close enough. A cubic meter is about 31% bigger than a cubic yard, so if a supplier quotes the same price “per cube” in both units, the cubic meter is the better deal.

Quick conversion table

Cubic yardsCubic metersCubic feet
0.5 yd³0.382 m³13.5 ft³
1 yd³0.765 m³27 ft³
2 yd³1.529 m³54 ft³
3 yd³2.294 m³81 ft³
5 yd³3.823 m³135 ft³
10 yd³7.646 m³270 ft³

Worked example: from measurements to cubic yards

You want to cover a 15 ft × 12 ft area with 3 inches of gravel.

  1. Convert the depth to feet: 3 ÷ 12 = 0.25 ft.
  2. Volume = 15 × 12 × 0.25 = 45 ft³.
  3. Cubic yards = 45 ÷ 27 = 1.667 yd³.
  4. In metric terms that is 1.667 × 0.7646 = 1.274 m³.

In practice you would add an allowance for waste and settling and round up to whatever increment your supplier sells — often a quarter or half yard.

Common pitfalls

  • Square vs cubic. Square yards (yd²) measure area; cubic yards measure volume. You need depth to get from one to the other.
  • Dividing by 9 instead of 27. Nine converts square feet to square yards. Cubic feet to cubic yards is ÷ 27.
  • Volume vs weight. A “yard” of gravel and a “ton” of gravel are different things. Converting between them needs the material’s density — see our gravel weight table.

Skip the arithmetic

The Gravel Calculator and Topsoil Calculator accept any mix of feet, inches, yards, meters, centimeters and millimeters, and always show cubic yards, cubic feet and cubic meters side by side.

Sources

  1. NIST Special Publication 811 — Guide for the Use of the International System of Units (SI)
  2. Weights and Measures Act 1985 (UK), Schedule 1

Sources were checked when this guide was published. Where published guidance differs, this guide says so; for structural work, follow your local specification.

Worked examples are generated by the same tested calculation engine as our calculators. See our editorial policy and methodology.