How to use the cubic yards to tons calculator
- Enter the volume — in cubic yards, cubic feet, cubic metres or litres. Use the Cubic Yard Calculator if you need to work it out from measurements.
- Choose the material. The calculator uses a typical loose bulk density for it and shows the full range.
- If your supplier quotes a weight per cubic yard (or per m³) for their product, enter it — it replaces the typical range.
Cubic yards to tons formula
US tons = pounds ÷ 2,000 · tonnes = kilograms ÷ 1,000
Bulk density is the weight of a loose volume including the air between stones or grains. It depends on the rock type, particle size, moisture and how much the material has settled — which is why the same cubic yard of “gravel” can weigh noticeably different amounts from different quarries.
Weight per cubic yard: typical ranges
| Material | US tons per yd³ | Typical | Tonnes per m³ |
|---|---|---|---|
| Gravel (general, loose) | 1.22–1.47 | 1.35 | 1.45–1.75 |
| Crushed stone (e.g. #57 / 20 mm clean) | 1.22–1.47 | 1.35 | 1.45–1.75 |
| Pea gravel | 1.22–1.43 | 1.31 | 1.45–1.7 |
| River rock / decorative cobbles | 1.14–1.43 | 1.26 | 1.35–1.7 |
| Crusher run / Type 1 sub-base (loose) | 1.43–1.77 | 1.6 | 1.7–2.1 |
| Sand (dry, loose) | 1.18–1.43 | 1.31 | 1.4–1.7 |
| Topsoil (screened, moist) | 0.84–1.22 | 1.05 | 1–1.45 |
| Garden / raised-bed soil mix | 0.42–0.8 | 0.59 | 0.5–0.95 |
| Compost | 0.38–0.67 | 0.51 | 0.45–0.8 |
| Wood chip / bark mulch | 0.21–0.42 | 0.29 | 0.25–0.5 |
Typical loose, as-delivered planning values used throughout YardCalio — not specifications. Your supplier’s figure takes priority.
Worked examples
3 cubic yards of crushed stone.
- Weight = 3 yd³ × typical density = 4.05 US tons
- Range: 3.67–4.42 US tons (3.33–4.01 t)
2 cubic yards of a product your supplier says weighs 2,700 lb per cubic yard.
- 2 × 2,700 = 5,400 lb = 2.7 US tons = 2.45 t
Tons vs tonnes
A US (short) ton is 2,000 lb (907.18 kg). A metric tonne is 1,000 kg (2,204.6 lb) — about 10% heavier. A UK “long ton” is 2,240 lb. Check which one your supplier means before comparing prices.
Frequently asked questions
How many tons are in a cubic yard of gravel?
On YardCalio’s typical range for general loose gravel, about 1.22–1.47 US tons. Ask your supplier for their product’s figure.
How many cubic yards are in a ton?
Divide 1 by the tons per cubic yard for your material. For a material at 1.4 US tons per cubic yard, one ton is about 0.71 cubic yards.
Why is weight shown as a range?
Because bulk density varies with rock type, size, moisture and compaction. Enter your supplier’s density for a single figure.
Is a ton the same as a tonne?
No. A US ton is 2,000 lb; a metric tonne is 1,000 kg, about 2,205 lb.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.
- The Engineering ToolBox — Densities of common materials — Typical bulk densities for sand, gravel, soil and other materials.
- Caterpillar — Earthwork volumes reference tables — Loose and bank densities for common earthwork materials.