
On this page (7 sections)
Two quotes for “gravel” can describe different stone, different amounts and different delivery terms. Getting accurate, comparable quotes is mostly about asking every supplier the same questions — and converting their answers into the same units.
Before you call
- Work out the quantity with the right calculator and download the PDF — it lists the area, depth, volume and weight.
- Know the product you want (for example, the stone size or soil type) and what it is for.
- Know where the load can be tipped and how the truck will reach it.
Questions to ask every supplier
- How is it sold? Per cubic yard, cubic metre, US ton or metric tonne?
- What does a cubic yard weigh? Needed to convert between price per ton and per yard.
- Ordering steps and minimums? Many yards sell in fixed steps and charge for a minimum load.
- Delivery: the fee, the truck size, and whether it can tip where you need it.
- Tax: is it included?
- Returns: can unopened bags or pallets go back?
Converting quotes to the same unit
Supplier A quotes $42 per US ton and says the stone weighs 2,800 lb per cubic yard. Supplier B quotes $55 per cubic yard.
- Tons per cu yd = 2,800 ÷ 2,000 = 1.4
- A = $42 × 1.4 = $58.80 per cu yd
- A is cheaper per yard than B — before delivery. Now compare the totals.
Prices in this example are invented round numbers that show the arithmetic only — they are not market prices. Use your own quotes.
Compare totals, not unit prices
For each quote, calculate: quantity (rounded to their ordering step) × unit price + delivery + tax. A low unit price with a high delivery fee or a large minimum can cost more overall. For contractor quotes, divide the total by the area with the Cost per Square Foot Calculator — but only after checking both quotes include the same work.
Comparing contractor quotes
For installed work, ask each contractor to list the scope line by line: excavation depth and removal of spoil, base material and its compacted depth, edging, bedding, the surface material, clean-up and warranty. Only then compare the totals — or the price per square foot. A quote that is much lower than the others usually leaves something out.
Red flags
- A price per “load” or “scoop” without a volume or weight.
- No answer to “what does a cubic yard weigh?” when selling by the ton.
- A contractor quote that does not state base depth, materials or what is removed.
Find suppliers near you on the supplier finder, and convert prices with the Price per Ton ↔ Cubic Yard Calculator.
Sources
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound, US gallon and the cubic yard used in every calculation in this guide.
Sources were checked when this guide was published. Where published guidance differs, this guide says so; for structural work, follow your local specification.
Worked examples are generated by the same tested calculation engine as our calculators. See our editorial policy and methodology.


