Price per Ton ↔ Cubic Yard Calculator

One supplier quotes per ton, another per cubic yard. Convert either price to the other so you can compare like with like — using a typical density range or the exact figure from your supplier.

Formulas tested · engine v1.0.0Runs on your deviceHow we calculate

Measurement system

Changing system converts the numbers you’ve entered, so your project stays the same size.

Enter the supplier’s weight per cubic yard (or m³) for an exact conversion instead of a range.

Your result—

Your estimate

—

Enter your measurements to see the quantity.

Convert a price per ton to a price per cubic yard (and back) for gravel, stone, sand and soil.

How to use the price converter

  1. Enter the price you were quoted and what it is per (US ton, tonne, cubic yard or cubic metre).
  2. Choose the material — or enter your supplier’s weight per cubic yard for an exact answer.
  3. Read the equivalent price per US ton, tonne, cubic yard and cubic metre.

The conversion

Price per cu yd = Price per ton × Tons per cu yd
Price per ton = Price per cu yd ÷ Tons per cu yd

Tons per cubic yard is the material’s bulk density. It varies between quarries and with moisture, so without the supplier’s figure the answer is a range.

Worked example

Crushed stone at $42 per US ton, and the quarry says it weighs 2,800 lb per cubic yard.

  1. Tons per cu yd = 2,800 ÷ 2,000 = 1.4
  2. $42 × 1.4 = $58.80 per cu yd

The prices in these examples are invented round numbers to show the arithmetic — they are not market prices. Use your own quotes.

Frequently asked questions

How do I convert price per ton to price per yard?

Multiply the price per ton by the material’s weight in tons per cubic yard. Ask your supplier for that figure; otherwise use a typical range.

Is a ton the same as a tonne?

No — a US ton is 2,000 lb and a metric tonne is 1,000 kg (about 2,205 lb). Check which one a quote uses.

Sources & methodology

Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.

  1. NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.
  2. The Engineering ToolBox — Densities of common materials — Typical bulk densities for sand, gravel, soil and other materials.
  3. Caterpillar — Earthwork volumes reference tables — Loose and bank densities for common earthwork materials.