Landscaping Cost per Square Foot Calculator

Compare quotes for patios, lawns, paths and beds on equal terms: divide each total by the area it covers to get a price per square foot, square metre, square yard or acre.

Formulas tested · engine v1.0.0Runs on your deviceHow we calculate

Measurement system

Changing system converts the numbers you’ve entered, so your project stays the same size.

Your result—

Your estimate

—

Enter your measurements to see the quantity.

Turn a quote or budget into a price per square foot, square metre, square yard and acre.

How to use the cost per square foot calculator

  1. Enter the total of a quote or your budget.
  2. Enter the area it covers — use the Square Footage Calculator for odd shapes.
  3. Read the cost per square foot, square metre, square yard and acre.

The formula

Cost per sq ft = Total cost ÷ Area (sq ft)
Cost per m² = Total cost ÷ Area (m²) · per sq yd = per sq ft × 9

Worked example

A quote of $7,360 for a 640 sq ft paver patio.

  1. $7,360 ÷ 640 = $11.50 per sq ft
  2. = $123.78 per m² = $103.50 per sq yd

The prices in these examples are invented round numbers to show the arithmetic — they are not market prices. Use your own quotes.

Comparing quotes fairly

  • Check each quote covers the same scope: excavation, base, edging, removal of spoil, delivery and tax.
  • Larger areas usually cost less per square foot because fixed costs (mobilisation, delivery) are spread further.
  • A low price per square foot is only a bargain if the specification is the same — compare base depths and materials too.

Frequently asked questions

How do I calculate cost per square foot?

Divide the total cost by the area in square feet. $4,800 for 600 sq ft is $8.00 per sq ft.

How do I convert price per square foot to per square metre?

Multiply by 10.764 (there are 10.764 sq ft in a square metre).

Sources & methodology

Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.

  1. NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.