Measurements & Calculations

How Much Does a Cubic Yard Cover? Mulch, Soil, Gravel and Sand

How many square feet one cubic yard (or cubic metre) of mulch, topsoil, gravel or sand covers at each depth — exact coverage charts, the formula and worked examples.

Large stockpiles of sorted gravel under a blue sky
Stockpiles of sorted gravel. One cubic yard covers the same area whatever the material — only the depth changes it. Photo: James St. John via Flickr · CC BY 2.0 · cropped and resized
On this page (7 sections)

Coverage is the other side of the cubic-yard question: instead of “how much do I need for this area?”, it asks “how far will this load go?”. It is the same for every material — mulch, topsoil, gravel or sand — because it only depends on volume and depth.

The coverage formula

Coverage (sq ft) = 27 ÷ Depth (ft) = 324 ÷ Depth (in)
Coverage (m²) = 1 ÷ Depth (m) per cubic metre

One cubic yard is 27 cubic feet. Spread it 1 ft deep and it covers 27 sq ft; spread it 1 inch (1/12 ft) deep and it covers 27 × 12 = 324 sq ft.

Coverage of one cubic yard

DepthCoversMetric
1 in324 sq ft30.1 m²
2 in162 sq ft15.1 m²
3 in108 sq ft10 m²
4 in81 sq ft7.5 m²
6 in54 sq ft5 m²
8 in41 sq ft3.8 m²
12 in27 sq ft2.5 m²

Coverage of one cubic metre

DepthCoversImperial
25 mm40 m²431 sq ft
50 mm20 m²215 sq ft
75 mm13.3 m²144 sq ft
100 mm10 m²108 sq ft
150 mm6.7 m²72 sq ft

Exact for a level surface. Loose materials settle or compact, so the finished depth can be a little less than the depth spread.

Worked examples

How far do 3 cubic yards of mulch go at 3 in deep?

  1. Coverage per yard at 3 in = 324 ÷ 3 = 108 sq ft
  2. 3 yards × 108 = 324 sq ft

How much gravel for 500 sq ft at 2 in?

  1. 500 × (2 ÷ 12) ÷ 27 = 3.09 cu yd

Coverage of a bag

The same formula works for bags. A bag of V cubic feet covers V × 12 ÷ depth in inches square feet:

BagAt 2 inAt 3 in
0.5 cu ft3 sq ft2 sq ft
1 cu ft6 sq ft4 sq ft
1.5 cu ft9 sq ft6 sq ft
2 cu ft12 sq ft8 sq ft
3 cu ft18 sq ft12 sq ft

So a 2 cu ft bag of mulch covers 12 sq ft at 2 in deep, or 8 sq ft at 3 in.

Does the material matter?

Not for coverage by volume — a cubic yard is a cubic yard. It matters for weight (a yard of gravel is far heavier than a yard of mulch) and for settling (fluffy mulch and loose soil settle more than clean stone). For weights, see the Cubic Yards to Tons Calculator; for bag counts, how many bags are in a cubic yard.

The Cubic Yard Calculator works the other way — from your measurements to the volume to order — and the material calculators add weights, bags and costs.

Sources

  1. NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound, US gallon and the cubic yard used in every calculation in this guide.

Sources were checked when this guide was published. Where published guidance differs, this guide says so; for structural work, follow your local specification.

Worked examples are generated by the same tested calculation engine as our calculators. See our editorial policy and methodology.