Measurements & Calculations

How Many Bags Are in a Cubic Yard? Mulch, Soil and Gravel

How many 1, 2 or 3 cu ft bags (or 40–70 litre bags) make a cubic yard of mulch, soil or gravel — with exact charts, the formula and when bulk is the better buy.

Bags of garden material lined up against a wooden fence on a lawn
Bags of garden material lined up on a lawn. Bags sold by volume convert exactly to cubic yards; bags sold by weight need the material’s density. Photo: KoryeLogan via Flickr · CC BY-SA 2.0 · cropped and resized
On this page (7 sections)

Garden centres sell mulch, soil and decorative stone in bags; landscape yards sell the same materials by the cubic yard. To compare them — or to turn a calculator result into a shopping list — you need to know how many bags make a yard. For bags sold by volume the answer is exact. For bags sold by weight it depends on the material.

The formula

Bags per cubic yard = 27 ÷ bag size (cu ft)
Bags per cubic metre = 1,000 ÷ bag size (litres)

One cubic yard is a cube 3 ft on each side: 3 × 3 × 3 = 27 cubic feet, or 764.55 litres. That is the whole trick.

Bags sold in cubic feet

Bag sizePer yd³Buy
0.5 cu ft5454
0.75 cu ft3636
1 cu ft2727
1.5 cu ft1818
2 cu ft13.514
2.5 cu ft10.811
3 cu ft99

So the common 2 cu ft bag of mulch gives 13.5 bags per cubic yard — buy 14. A 3 cu ft bag gives exactly 9.

Bags sold in litres

BagPer yd³BuyPer m³
25 L30.63140
40 L19.12025
50 L15.31620
60 L12.71316.7
70 L10.91114.3
100 L7.6810

Bags sold by weight

Gravel, sand and some soils are bagged by weight. To convert, you need the weight of a cubic yard of that material — its bulk density — which varies with moisture, rock type and size. Using the typical planning values YardCalio’s calculators use:

Material and baglb per yd³Bags
Pea gravel, 50 lb bags2,61352.3
Sand (dry, loose), 50 lb bags2,61352.3
Topsoil (screened, moist), 40 lb bags2,10752.7

Estimates from typical loose bulk densities. Damp material weighs more, so you may need more or fewer bags; many bag labels also state a volume or coverage — use that when it is given.

Worked example

A border needs 1.5 cubic yards of mulch. How many 2 cu ft bags?

  1. 1.5 × 27 = 40.5 cubic feet
  2. 40.5 ÷ 2 = 20.25 → 21 bags

The Mulch Calculator and Topsoil Calculator do this automatically from your measurements, and the Cubic Yard Calculator works for any material.

Bags or bulk?

Bags are easy to carry through a house and store, and nothing is left over. Bulk is usually cheaper per cubic yard once you need more than a small amount, but comes with a delivery charge and needs a place to tip. Price both: multiply the bag price by the bag count, and compare it with the bulk price plus delivery. The calculators’ cost sections do this with the prices you enter — see how to calculate landscaping material costs.

Sources

  1. NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound, US gallon and the cubic yard used in every calculation in this guide.
  2. The Engineering ToolBox — Densities of common materials — Typical bulk densities for sand, gravel and soil.
  3. Caterpillar — Earthwork volumes reference tables — Loose densities for common earthwork materials.

Sources were checked when this guide was published. Where published guidance differs, this guide says so; for structural work, follow your local specification.

Worked examples are generated by the same tested calculation engine as our calculators. See our editorial policy and methodology.