How to use the stepping stone calculator
- Measure the path from where the first stone goes to where the last one goes.
- Find your spacing: walk the route at a relaxed pace and measure from one footfall to the next. Measure the stride of the people who will use the path most.
- Enter the stone size and, if you are bedding them, the depth of sand or gravel under each stone.
Stepping stone formula
Gap = Spacing − Stone length
Bedding = Stone length × Stone width × Depth × Stones
The “+ 1” is the stone at the start of the path; spacing is measured centre to centre, like footsteps.
Worked example
A 20 ft path, 24 in spacing, 16 × 16 in stones on 2 in of sand.
- Stones = 240 in ÷ 24 in = 10, + 1 = 11
- Gap = 24 − 16 = 8 in
- Bedding = 16 × 16 × 2 in × 11 = 3.26 cu ft (0.121 cu yd)
Laying stepping stones
- Lay the stones out on the ground first and walk the path before digging.
- Set each stone so its top is level with or just above the surrounding soil or lawn, so mowers pass over it.
- For bedding sand, see the Sand Calculator; for gravel between stones, the Pea Gravel Calculator.
Frequently asked questions
How many stepping stones do I need?
Divide the path length by your spacing (centre to centre), round down, and add one for the first stone. A 20 ft path at 24 in spacing needs 11 stones.
How far apart should stepping stones be?
Space them to match a comfortable stride for the people who will use the path — measure from one footfall to the next as you walk the route.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.