Lawn & Grass

How to Read a Grass Seed Label (Purity, Germination and PLS)

What a grass seed label must show, what purity, germination and “variety not stated” mean, and how pure live seed (PLS) adjusts your seeding rate.

A grass seed head lit by warm sunlight
Grass seed. The label tells you how much of what you are buying will actually grow — and how much more to sow if quality is low. Photo: SamuelJohn.de via Flickr · CC BY-SA 2.0 · cropped and resized
On this page (7 sections)

Two bags of the same grass can grow very different lawns. The difference is printed on the label. Penn State Extension explains that low-quality seed — low viability, high weed seed or low purity — gives a thin, weedy lawn, and that by law the label must tell you about the seed’s origin and quality. Here is how to read it.

What the label shows

  • Kind and variety of each grass, in order of predominance, with the percentage by weight of each — this is its purity.
  • Germination % for each grass — the share that sprouted in a standard test, usually done within nine months of sale.
  • Other crop seed and weed seed, as percentages by weight.
  • A lot number that traces the seed to where it was produced.

“Variety not stated” and certified seed

When no cultivar is named, the label says “variety not stated” (VNS) or “common”. Penn State notes this generally indicates lower-quality seed — though a named variety is not automatically better. Seed certified by an official seed agency is, in Penn State’s words, the only real guarantee of cultivar purity; buy certified seed when you can.

Pure live seed (PLS)

Purity and germination together tell you how much of the bag can actually become grass:

PLS % = Purity % × Germination % ÷ 100
Seed per pound specified = 100 ÷ PLS %

Penn State’s example: 92% pure × 80% germination ÷ 100 = 74% PLS, so you need 100 ÷ 74 = 1.35 lb of that seed for every pound a recipe calls for.

LabelPLSSeed per 1 lb specified
98% pure · 90% germ.88.2%1.13 lb
95% pure · 85% germ.80.8%1.24 lb
92% pure · 80% germ.73.6%1.36 lb
85% pure · 70% germ.59.5%1.68 lb
70% pure · 75% germ.52.5%1.9 lb

Calculated with Penn State Extension’s PLS method.

Adjusting your seeding rate

Penn State notes typical seeding rates are designed to give about 1,000 to 2,000 seedlings per 1,000 sq ft. If your seed’s PLS is low, multiply the rate by 100 ÷ PLS to get the same number of seedlings. Enter the adjusted rate in the Grass Seed Calculator.

Is the cheap bag really cheaper?

Price per pound of pure live seed = Price per pound ÷ (PLS % ÷ 100)

Penn State compares a “bargain” lot with 51% PLS against a lot with 89% PLS: the bargain needs about 2 lb for every pound specified, against 1.1 lb for the better seed, and works out more expensive per pound of seed that will grow. Do the same sum with the prices in front of you.

More than the numbers

Sources

  1. Penn State Extension — Lawn Establishment (P. Landschoot) — Seeding and sodding times, seedbed preparation, seed labels and pure live seed, starter fertilizer, straw mulch, sod installation and care of new lawns (Pennsylvania).

Sources were checked when this guide was published. Where published guidance differs, this guide says so; for structural work, follow your local specification.

Worked examples are generated by the same tested calculation engine as our calculators. See our editorial policy and methodology.