How to use the boulder weight calculator
- Choose Rounded boulder for natural stone, or Block for squared slabs and wall stones.
- Measure the longest length, the width and the height at their widest points.
- Keep the default specific gravity of 2.65, or enter your supplier’s figure for the stone.
Boulder weight formula
Block volume = Length × Width × Height
Weight = Volume × Specific gravity × 62.43 lb per cu ft
Specific gravity is how many times heavier the stone is than the same volume of water (62.43 lb per cubic foot, 1,000 kg per cubic metre). An FHWA report cites about 2.65 as the average for crushed limestone, which is why it is the default. The ellipsoid formula fits a smooth egg shape to the three dimensions; a natural boulder can be lighter (more rounded) or heavier (squarer) than this estimate.
Worked examples
A rounded boulder 3 × 2 × 2 ft.
- Volume ≈ 3.1416 ÷ 6 × 3 × 2 × 2 = 6.28 cu ft
- Weight ≈ 6.28 × 2.65 × 62.43 = 1,039 lb (0.52 US tons, 471 kg)
A stone slab 4 ft × 2 ft × 6 in.
- Volume = 4 × 2 × 0.5 = 4 cu ft
- Weight = 4 × 2.65 × 62.43 = 662 lb
Moving boulders safely
- Treat the result as an estimate. Ask the stone yard for the actual weight before planning to lift or haul.
- Never exceed the rated capacity of a trailer, truck, dolly or lifting equipment.
- Large boulders are usually placed by the supplier with a loader or crane — ask about delivery and placement.
- For river rock or gravel sold by the yard or ton, use the Gravel Calculator or the Cubic Yards to Tons Calculator instead.
Frequently asked questions
How much does a landscape boulder weigh?
It depends on size and stone. A rounded boulder 3 × 2 × 2 ft is about 6.3 cu ft; at a specific gravity of 2.65 that is roughly 1,040 lb. Enter your own measurements for an estimate.
How much does a cubic foot of stone weigh?
Solid stone with a specific gravity of 2.65 weighs about 2.65 × 62.43 ≈ 165 lb per cubic foot. Loose gravel weighs much less per cubic foot because of the air between stones.
What specific gravity should I use?
An FHWA report cites about 2.65 for crushed limestone. Most common landscape stone is in a similar range, but your supplier may know the figure for their stone.
Sources & methodology
Unit conversions use exact legal definitions. Material densities are typical planning values that vary in practice — see the calculation methodology for every constant, rounding rule and test.
- FHWA HIF-12-008 — Use of Air-Cooled Blast Furnace Slag as Coarse Aggregate in Concrete Pavements — Cites an average bulk specific gravity of about 2.65 for crushed limestone aggregate (Somayaji 2001) — the calculator’s default.
- NIST Special Publication 811 — Guide for the Use of the International System of Units (SI) — Exact definitions of the inch, foot, yard, acre, pound and US gallon used for every conversion.